Tactical Height Solutions
Pressure cleaning a window ledge from the rope, technician in hi-vis

Building washing and façade cleaning in Sydney

Render, brick, concrete and cladding washed from the rope, before painting or as regular maintenance to keep a façade looking new.

  • Right pressure for each surface
  • Runoff managed
  • No scaffold or lift

★ 5.0 on Google (12 reviews) · IRATA Level 3 supervised · Kattsafe and Safetylink certified · $20M public liability · CM3 prequalified

Request a free quote

We reply the same day. ★ 5.0 from 12 Google reviews

Phone or email, whichever suits you.

Free site inspection · fixed-price quote · insurance and SWMS attached. We only use your details to reply to your enquiry. Privacy policy

Pressure cleaning and façade washing at a glance

Tactical Height Solutions provides pressure cleaning and façade washing for buildings in Sydney using IRATA-certified rope access technicians instead of scaffolding. Render, brick, concrete and cladding washed from the rope, before painting or as regular maintenance to keep a façade looking new. Every job is supervised by an IRATA Level 3 technician, carried out under NSW contractor licence 478674C, and covered by $20 million public liability insurance. Site inspections in Sydney are free, enquiries get a reply the same day, and most jobs can start within 48 hours of an approved quote.

Updated October 2026 by the Tactical Height Solutions team.

Dirt, mould and pollution make a building look older than it is, and they shorten the life of the paint underneath. A proper façade wash every couple of years keeps a building looking well kept and extends the time between repaints.

We clean façades from the rope, so the whole building can be reached without booms or swing stages. The pressure, nozzle and cleaning solution are matched to the surface, because what cleans concrete will damage soft render or painted cladding.

Washing is also the first step of every repaint we do, so the new coating bonds to a clean surface.

Why clients choose us

  • Every surface reachableUpper levels, recesses and parapets that a lift cannot get to.
  • Gentle where neededPressure and chemicals matched to render, brick, paint or cladding.
  • Longer-lasting paintRegular washing removes mould and grime that break down coatings.
  • Tidy siteRunoff and overspray managed around balconies, cars and gardens.

What this work costs

Typical price$7.72 – $9.81 per m² of façade + GST

From 200 m². How dirty, the surface and access move the price.

From our smaller, simpler jobs to larger or harder ones. For your building's own range, use the instant estimate; the fixed price follows a free site inspection.

Want a price for this work?

See a price range in a minute with our instant estimate, or send the address and a few photos for a free fixed-price quote. We reply the same day, with our insurance certificates and SWMS attached.

Get an instant estimate Request a free quote Call 0478 152 630

How the job runs

  1. Surface checkWe identify the surfaces, stains and any fragile areas.
  2. Test patchA small area is cleaned to confirm the right pressure and solution.
  3. ProtectionWindows, balconies and the ground below protected and residents notified.
  4. WashingTop-down cleaning, drop by drop, with soft-wash methods where needed.
  5. Rinse and checkFinal rinse and inspection from the rope.

Technical details

SurfacesRender, painted masonry, face brick, concrete, cladding, sandstone
MethodsPressure washing, soft washing, mould and algae treatments
AccessRope access by IRATA-certified technicians

What you receive

  • A fixed-price quote after a free site inspection
  • Insurance certificates and a site-specific SWMS with the quote
  • An IRATA Level 3 supervisor responsible for the work
  • Progress photos as the work goes
  • A photo report at handover
  • A written workmanship warranty on repair and painting work

Questions about pressure cleaning and façade washing

How often should a strata building be washed?

Every one to three years is typical, depending on the location, exposure and colour. Coastal and tree-shaded buildings usually need it more often.

Will pressure cleaning damage render or paint?

Not when it is done at the right pressure with the right nozzle. We test first and use soft-washing methods on delicate surfaces.

Do residents need to do anything?

Close windows and move items off balconies near the work. We notify residents through the building manager before we start each elevation.

Ready for a fixed-price quote?

See a price range in a minute with our instant estimate, or send the address and a few photos for a free fixed-price quote. We reply the same day, with our insurance certificates and SWMS attached.

Get an instant estimate Request a free quote Call 0478 152 630

See this work on real buildings in our projects, or read about our safety and insurance.

Get a price for your building

An instant estimate in a minute, or a free fixed-price quote after a site inspection. Insurance and SWMS attached.