Tactical Height Solutions
Technician on rope coating a rendered wall over stitched crack repairs

Industrial and protective coatings in Sydney

Anti-carbonation, elastomeric and anti-corrosion coating systems applied from the rope to protect concrete, render and steel.

  • Manufacturer-specified systems
  • Coastal and industrial exposure
  • Applied by trade painters

★ 5.0 on Google (12 reviews) · IRATA Level 3 supervised · Kattsafe and Safetylink certified · $20M public liability

Request a free quote

We reply the same day. ★ 5.0 from 12 Google reviews

We need your name and a phone number or email, whichever suits you. Everything else is optional but helps us price it.

Free site inspection · fixed-price quote · SWMS included · insurance certificates on request. After you send it, we reply the same day in office hours (enquiries outside hours the next working day). We only use your details to reply to your enquiry. Privacy policy

Protective coatings and membranes at a glance

Tactical Height Solutions provides protective coatings and membranes for buildings in Sydney using IRATA-certified rope access technicians instead of scaffolding. Anti-carbonation, elastomeric and anti-corrosion coating systems applied from the rope to protect concrete, render and steel. Every job is supervised by an IRATA Level 3 technician, carried out under NSW contractor licence 478674C, and covered by $20 million public liability insurance. Site inspections in Sydney are free, enquiries get a reply the same day, and most jobs can start within 48 hours of an approved quote.

Updated October 2026 by the Tactical Height Solutions team.

Decorative paint makes a building look good. Protective coatings keep it standing up to weather, salt and pollution. On concrete buildings, steel structures and coastal sites, the right coating system can add years to the life of the structure and the time between major repairs.

We apply protective coating systems from the rope: anti-carbonation coatings on concrete, elastomeric membranes that bridge fine cracks in render, and anti-corrosion systems on steel. Each system goes on to the manufacturer's specification for preparation, film thickness and recoat times, because that is what the coating's performance depends on.

Why clients choose us

  • Protects the structureSlows carbonation and corrosion, the causes of concrete cancer.
  • Bridges fine cracksElastomeric systems flex with the building and keep water out.
  • Specified correctlyPreparation and film thickness to the manufacturer data sheet.
  • Hard-to-reach areasTanks, structures and façades without scaffold or lifts.

What this work costs

Pricing varies by project scope. Contact us for an assessment and tailored quotation.

Want a price for this work?

Send the address and a few photos for a free fixed-price quote. We reply the same day, with the SWMS for the job; insurance certificates on request.

Request a free quote Call 0478 152 630

How the job runs

  1. AssessmentSubstrate, exposure and existing coatings checked.
  2. System selectionA Dulux system matched to the job.
  3. PreparationCleaning, repairs and priming to specification.
  4. ApplicationCoats applied to the specified film thickness.
  5. InspectionFilm thickness checks where specified, and a photo record.

Technical details

SystemsAnti-carbonation coatings, elastomeric membranes, anti-corrosion primers and topcoats
SubstratesConcrete, render, masonry, structural steel
BrandsDulux

What you receive

  • A fixed-price quote after a free site inspection
  • A site-specific SWMS with the quote, and insurance certificates on request
  • An IRATA Level 3 supervisor responsible for the work
  • Progress photos as the work goes
  • A photo report at handover
  • A written workmanship warranty on repair and painting work

Questions about protective coatings and membranes

What is an anti-carbonation coating?

It is a coating that slows the carbon dioxide in the air from reaching the concrete and reducing its protection of the steel inside. It is often applied after concrete repairs to help prevent concrete cancer returning.

What is an elastomeric coating?

An elastomeric coating is a thick, flexible coating that stretches with small movements in the wall. It can bridge fine cracks in render and keeps water out better than standard paint.

Can protective coatings be applied by rope access?

Yes. Most façade and structure coatings can be applied from the rope, as long as the preparation and application conditions on the data sheet can be met.

Ready for a fixed-price quote?

Send the address and a few photos for a free fixed-price quote. We reply the same day, with the SWMS for the job; insurance certificates on request.

Request a free quote Call 0478 152 630

Read more

See this work on real buildings in our projects, or read about our safety and insurance.

Get a price for your building

A free fixed-price quote after a site inspection. We reply the same day. SWMS with every quote; insurance certificates on request.